The PHILIO Z-Wave Multi-Sensor is a battery powered, PIR, temperature and light level sensor, all in one small package.
100% Secure Payments
Australian Wide Flat Rate Delivery
Fast Response
The PHILIO Z-Wave Multi-Sensor allows you to detect motion and to measure a room’s ambient temperature and light intensity. When included into a Z-Wave network with a home automation controller or Z-Wave gateway it can be used to trigger scenes and activate other Z-Wave devices within your Z-Wave network. It can also alert the user of intruders via their Z-Wave gateway.
The PHILIO Z-Wave Multi-Sensor supports Over the Air (OTA) firmware updates and reports its battery status making it very easy to maintain.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave sensor
|
|
Power
|
CR123A Lithium battery (included)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor
|
|
Operation temperature
|
-10 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 60 °C
|
|
Weight
|
60g
|
|
Dimensions
|
80mm x 27mm x 23mm
|
|
Housing
|
ABS
|
The PHILIO Z-Wave Multi-Sensor is a battery powered, PIR, temperature and light level sensor, all in one small package.
